$180 now comes with free throttle body wash!

Jet Clean Tronic is a device for cleaning all diesel injection systems, as well as gasoline engines. Deposits that build up on the elements of injection systems and combustion chamber are a common cause of irregular engine, increased fuel consumption and emissions of harmful substances more in the exhaust. Another symptom of the contaminated injection system is also often a large smoke especially when rapid engine load (eg overtaking).

In addition, gas-powered engines after a long operation in the fuel, there are often problems with the engine on gasoline is due to accumulation of large amounts of pollutants to the injectors, also in many types of gas installations after switching on the "gas" is cut off the fuel supply to the injectors, and this, in turn, causes the "browning" of injectors. The gasoline engine can also clean the intake and intake of particulate matter from the filter inside the injector. Cleaning the intake manifold is particularly important in vehicles that are operated mainly in city traffic.

Petrol engine:

dissolution of deposits in fuel injectors and "rail" injection - is an automatic cleaning cycle, which lasts 8 minutes

cleaning the injection system and combustion chamber, the inlet valve - this cycle lasts from 20 to 40 minutes depending on the degree of contamination of components of the injection system, the engine is of special cleaning agents.

sucking pollutants mesh injector - automatic cycle takes 90 seconds for each 4 injectors

cleaning the intake manifold - this cycle lasts from 15 to 35 minutes depending on the degree of contamination of the intake manifold, the engine during this process runs on petrol and also lead to the intake manifold vacuum is given cleaner.

Diesel engine:

clean the injection system and the combustion chamber, the process takes about 35 minutes, the engine should be at this time to work on cleaning fluid, while cleaning the injection system will be cleared:

cleaning of the injection pump

cleaning injectors

Cleaning of the combustion chamber

cleaning turbines with variable geometry VTG

cleaning the intake manifold

cleaning the DPF particulate filter

Info directly from Liqui Moly's main web.

https://www.liqui-moly.com/

Operating hours 3pm - 3am!

$180 now comes with free throttle body wash!

Jet Clean Tronic is a device for cleaning all diesel injection systems, as well as gasoline engines. Deposits that build up on the elements of injection systems and combustion chamber are a common cause of irregular engine, increased fuel consumption and emissions of harmful substances more in the exhaust. Another symptom of the contaminated injection system is also often a large smoke especially when rapid engine load (eg overtaking).

In addition, gas-powered engines after a long operation in the fuel, there are often problems with the engine on gasoline is due to accumulation of large amounts of pollutants to the injectors, also in many types of gas installations after switching on the "gas" is cut off the fuel supply to the injectors, and this, in turn, causes the "browning" of injectors. The gasoline engine can also clean the intake and intake of particulate matter from the filter inside the injector. Cleaning the intake manifold is particularly important in vehicles that are operated mainly in city traffic.

Petrol engine:

dissolution of deposits in fuel injectors and "rail" injection - is an automatic cleaning cycle, which lasts 8 minutes

cleaning the injection system and combustion chamber, the inlet valve - this cycle lasts from 20 to 40 minutes depending on the degree of contamination of components of the injection system, the engine is of special cleaning agents.

sucking pollutants mesh injector - automatic cycle takes 90 seconds for each 4 injectors

cleaning the intake manifold - this cycle lasts from 15 to 35 minutes depending on the degree of contamination of the intake manifold, the engine during this process runs on petrol and also lead to the intake manifold vacuum is given cleaner.

Diesel engine:

clean the injection system and the combustion chamber, the process takes about 35 minutes, the engine should be at this time to work on cleaning fluid, while cleaning the injection system will be cleared:

cleaning of the injection pump

cleaning injectors

Cleaning of the combustion chamber

cleaning turbines with variable geometry VTG

cleaning the intake manifold

cleaning the DPF particulate filter

Info directly from Liqui Moly's main web.

https://www.liqui-moly.com/

Operating hours 3pm - 3am!