Evolution 3S2 is rare great performance 2 way car audio speaker as claimed by Janne Soilakari from Finland Autosound magazine. Sound characteristic is a correction of the mistakes in the recording, providing a pleasant music throughout any recording and the tweeter is very clear and straight forward. Janne Soilakari gives listening rating 9 out of 10. Evolution 3S2’s passive crossover uses Europe and USA component with 100% hand picked to design value, with zero tolerance, so that customer can hear the same thing as Evolution 3S2 designer. Bi-wire (2 input) for separate time alignment and gain between tweeter and midwoofer perfecting the design of Evolution 3S2.

• Crescendo Evolution 3S2 Active- $700.00
• Crescendo Evolution 3S2 Full Passive- $1080.00

Technical Data

• Minimum impedance: 4 Ohm
• Frequency response: 63 Hz – 20 kHz
• Power Demand: 50 – 100 Watts
• Cosmetic appearance: Satin aluminum
• Package accessories: ABS tweeter pod, Nickel plated screws
• Tweeter cone size: 25 mm
• Tweeter cone material: Soft fabric dome
• Tweeter magnet: Neodymium
• Tweeter motor design: Concave pole, Ported pole, Underhung
• Tweeter chassis: Aluminum, Patented design
• Tweeter accessories: Silver plated copper 4N cable
• (Mid)woofer size: 177 mm (7 inch)
• (Mid)woofer voice coil: 31 mm
• (Mid)woofer cone material: Polypropylene
• (Mid)woofer surround material: Butyl rubber
• (Mid)woofer magnet: 90 x 15 mm, Ferrite
• (Mid)woofer motor design: Overhung
• (Mid)woofer chassis: Ported, Solid die cast aluminum
• Tweeter attenuation: 3 attenuation, Full L-pad
• Passive xover design: Bi – wire (2 input), Impedance compensation
• Passive xover component: 0% tolerance, 1 mm inductor, Hand picked, USA & Europe brand

Evolution 3S2 is rare great performance 2 way car audio speaker as claimed by Janne Soilakari from Finland Autosound magazine. Sound characteristic is a correction of the mistakes in the recording, providing a pleasant music throughout any recording and the tweeter is very clear and straight forward. Janne Soilakari gives listening rating 9 out of 10. Evolution 3S2’s passive crossover uses Europe and USA component with 100% hand picked to design value, with zero tolerance, so that customer can hear the same thing as Evolution 3S2 designer. Bi-wire (2 input) for separate time alignment and gain between tweeter and midwoofer perfecting the design of Evolution 3S2.

• Crescendo Evolution 3S2 Active- $700.00
• Crescendo Evolution 3S2 Full Passive- $1080.00

Technical Data

• Minimum impedance: 4 Ohm
• Frequency response: 63 Hz – 20 kHz
• Power Demand: 50 – 100 Watts
• Cosmetic appearance: Satin aluminum
• Package accessories: ABS tweeter pod, Nickel plated screws
• Tweeter cone size: 25 mm
• Tweeter cone material: Soft fabric dome
• Tweeter magnet: Neodymium
• Tweeter motor design: Concave pole, Ported pole, Underhung
• Tweeter chassis: Aluminum, Patented design
• Tweeter accessories: Silver plated copper 4N cable
• (Mid)woofer size: 177 mm (7 inch)
• (Mid)woofer voice coil: 31 mm
• (Mid)woofer cone material: Polypropylene
• (Mid)woofer surround material: Butyl rubber
• (Mid)woofer magnet: 90 x 15 mm, Ferrite
• (Mid)woofer motor design: Overhung
• (Mid)woofer chassis: Ported, Solid die cast aluminum
• Tweeter attenuation: 3 attenuation, Full L-pad
• Passive xover design: Bi – wire (2 input), Impedance compensation
• Passive xover component: 0% tolerance, 1 mm inductor, Hand picked, USA & Europe brand