The Elate Carbon MM3 is a true masterpiece. The dedicated 3.5” midrange combines a large 2.1-inch voice coil and Morel’s EVC motor design which encapsulates a highly efficient neodymium magnet system, and the newly developed triple layer carbon fiber/Rohacell cone. With exceptional power handling and low fs, the MM3 is capable of playing lower in frequency than other midrange of its size, while striking the right balance of acoustic and mechanical attributes to offer a very flat frequency response, beautifully smooth midrange and tonal balance.

Specifications ​​​​​​​

• Nominal Impendance (ohm): 4
• Power Handling Wrms: 120
• Max. Trans. Pwr Handling Wrms (10ms): 400
• Sensitivity (2.83 V/1M) dB: 87
• Frequency Response Hz: 90 - 6000
• FS Hz: 88
• Voice Coil Diameter mm (inch): 54 (2.125)
• Voice Coil Former: Aluminium
• Voice Coil Wire: HexatechTM aluminium
• DC Resistance ohm: 3
• Magnet System: Neodymium Rear Vented
• Cone Type: One-piece formed
• Cone Material: DPC
• Unit Diameter mm (inch): 100.00 (3.9)
• Mounting Dept mm (inch): 38.00 (1.5)
• Mounting Cutout mm (inch): 83 (3.3)
• Net Weight Kg (lb): 0.38 (0.83)

The Elate Carbon MM3 is a true masterpiece. The dedicated 3.5” midrange combines a large 2.1-inch voice coil and Morel’s EVC motor design which encapsulates a highly efficient neodymium magnet system, and the newly developed triple layer carbon fiber/Rohacell cone. With exceptional power handling and low fs, the MM3 is capable of playing lower in frequency than other midrange of its size, while striking the right balance of acoustic and mechanical attributes to offer a very flat frequency response, beautifully smooth midrange and tonal balance.

Specifications ​​​​​​​

• Nominal Impendance (ohm): 4
• Power Handling Wrms: 120
• Max. Trans. Pwr Handling Wrms (10ms): 400
• Sensitivity (2.83 V/1M) dB: 87
• Frequency Response Hz: 90 - 6000
• FS Hz: 88
• Voice Coil Diameter mm (inch): 54 (2.125)
• Voice Coil Former: Aluminium
• Voice Coil Wire: HexatechTM aluminium
• DC Resistance ohm: 3
• Magnet System: Neodymium Rear Vented
• Cone Type: One-piece formed
• Cone Material: DPC
• Unit Diameter mm (inch): 100.00 (3.9)
• Mounting Dept mm (inch): 38.00 (1.5)
• Mounting Cutout mm (inch): 83 (3.3)
• Net Weight Kg (lb): 0.38 (0.83)