5 Channel 2X 85 Watt AB Class, 2X 170 Watt AB Class & 1X 600 Watt D Class Amplifier

5 channel amplifier

• Sn Ratio: > 83 dBA (ref: 1 Watt into 4 Ohm)

Specification

Target powers:

• 95×2 + 185×2 + 660×1 Watt @ 4 Ohm
• 150×2 + 290×2 + 1030×1 Watt @ 2 Ohm

Input sensitivity: (Power rating ref)

• 0.35V ÷ 12V (5.3V in DDSP mode) [CH1/2/3/4]
• 0.14V ÷ 5.9V (3.1V in DDSP mode) [CH5]

Xover functions:

• CH1/2= HP: 43 ÷ 500Hz(x1) or 430 ÷ 5000Hz(x10) [12 dB/oct – Q: 0.7]
• CH3/4= HP: 50 ÷ 200Hz & LP:(430 ÷ 5000Hz) [12 dB/oct – Q: 0.7]
• CH5= LP: 43 ÷ 200Hz [24 dB/oct]

Special features:

• Direct DSP (bypass all the preamplifier circuitry but the differential input interface)
• High Level / Low Level selectable input
• RTC input
• Internally controlled via Atmel Processor

5 Channel 2X 85 Watt AB Class, 2X 170 Watt AB Class & 1X 600 Watt D Class Amplifier

5 channel amplifier

• Sn Ratio: > 83 dBA (ref: 1 Watt into 4 Ohm)

Specification

Target powers:

• 95×2 + 185×2 + 660×1 Watt @ 4 Ohm
• 150×2 + 290×2 + 1030×1 Watt @ 2 Ohm

Input sensitivity: (Power rating ref)

• 0.35V ÷ 12V (5.3V in DDSP mode) [CH1/2/3/4]
• 0.14V ÷ 5.9V (3.1V in DDSP mode) [CH5]

Xover functions:

• CH1/2= HP: 43 ÷ 500Hz(x1) or 430 ÷ 5000Hz(x10) [12 dB/oct – Q: 0.7]
• CH3/4= HP: 50 ÷ 200Hz & LP:(430 ÷ 5000Hz) [12 dB/oct – Q: 0.7]
• CH5= LP: 43 ÷ 200Hz [24 dB/oct]

Special features:

• Direct DSP (bypass all the preamplifier circuitry but the differential input interface)
• High Level / Low Level selectable input
• RTC input
• Internally controlled via Atmel Processor