Features

• Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
• Start-Stop capability down to 6V supply voltage
• 6-channel lowlevel input
• Integrated, active crossover with highpass, lowpass, bandpass and subsonic
• “Input mode” switch for channel E & F for flexible input signal routing
• SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
• Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Technical data

Output power RMS / max.:
- @ 4 Ohms: 6 x 100 / 200 Watts
- @ 2 Ohms: 6 x 100 / 200 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: 3 x 200 / 400 Watts
- bridged @ 2 Ohms: - 

Max. output power per channel*: Up to 130 Watts RMS @ 4 / 2 Ohms

Amplifier technology: Class D

Inputs:
6 x RCA / Cinch
1 x Remote In

Input sensitivity: RCA / Cinch 0.5 - 6 Volts

Input impedance RCA / Cinch: 20 kOhms

Input impedance highlevel: - 

Outputs: 6 x Speaker output

Output voltage RCA / Cinch: - 

Signal converter for digital input: - 

Frequency response: 10 Hz - 30,000 Hz

Bass boost: - 

Highpass: 15 Hz - 4,000 Hz adjustable

Lowpass: 40 Hz - 4,000 Hz adjustable

Bandpass: 15 Hz - 4,000 Hz adjustable

Subsonic / HPF: 15 Hz - 4,000 Hz adjustable

Phase: - 

Slope high- / lowpass: 12 dB/Oct.

Slope subsonic / lowpass: - 

Signal-to-noise ratio digital input: - 

Signal-to-noise ratio analog input: 98 dB (A-weighted)

Distortion (THD): 0.05 %

Damping factor: 100

Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current: 1,550 mA

Fuse: 2 x 35 A Maxi-fuse (APX)

Additional features: Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability

Dimensions (H x W x D): 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06”

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)

Features

• Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
• Start-Stop capability down to 6V supply voltage
• 6-channel lowlevel input
• Integrated, active crossover with highpass, lowpass, bandpass and subsonic
• “Input mode” switch for channel E & F for flexible input signal routing
• SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
• Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Technical data

Output power RMS / max.:
- @ 4 Ohms: 6 x 100 / 200 Watts
- @ 2 Ohms: 6 x 100 / 200 Watts
- @ 1 Ohm: -
- bridged @ 4 Ohms: 3 x 200 / 400 Watts
- bridged @ 2 Ohms: - 

Max. output power per channel*: Up to 130 Watts RMS @ 4 / 2 Ohms

Amplifier technology: Class D

Inputs:
6 x RCA / Cinch
1 x Remote In

Input sensitivity: RCA / Cinch 0.5 - 6 Volts

Input impedance RCA / Cinch: 20 kOhms

Input impedance highlevel: - 

Outputs: 6 x Speaker output

Output voltage RCA / Cinch: - 

Signal converter for digital input: - 

Frequency response: 10 Hz - 30,000 Hz

Bass boost: - 

Highpass: 15 Hz - 4,000 Hz adjustable

Lowpass: 40 Hz - 4,000 Hz adjustable

Bandpass: 15 Hz - 4,000 Hz adjustable

Subsonic / HPF: 15 Hz - 4,000 Hz adjustable

Phase: - 

Slope high- / lowpass: 12 dB/Oct.

Slope subsonic / lowpass: - 

Signal-to-noise ratio digital input: - 

Signal-to-noise ratio analog input: 98 dB (A-weighted)

Distortion (THD): 0.05 %

Damping factor: 100

Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current: 1,550 mA

Fuse: 2 x 35 A Maxi-fuse (APX)

Additional features: Active, adjustable crossover, subsonic input mode switch channel E / F, subsonic, Start-Stop capability

Dimensions (H x W x D): 50 x 320 x 154 mm / 2.00 x 12.60 x 6.06”

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)