Features

• Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
• Start-Stop capability down to 6V supply voltage
• Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function
• Integrated, active crossover with highpass, lowpass and bandpass
• “Input mode” switch for flexible input signal routing
• SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
• Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Technical data

Output power RMS / max.:
- @ 4 Ohms4 x 100 / 200 Watts
- @ 2 Ohms4 x 100 / 200 Watts
- @ 1 Ohm-
- bridged @ 4 Ohms2 x 200 / 400 Watts
- bridged @ 2 Ohms- 

Max. output power per channel*: Up to 135 Watts RMS @ 4 / 2 Ohms

Amplifier technology: Class D

Inputs:
4 x RCA / Cinch
4 x Highlevel speaker input
1 x Remote In

Input sensitivity:
RCA / Cinch 0.5 - 6 Volts
Highlevel 1.3 - 13 Volts

Input impedance RCA / Cinch: 20 kOhms

Input impedance highlevel: 9 - 33 Ohms

Outputs: 4 x Speaker output

Output voltage RCA / Cinch: - 

Signal converter for digital input: - 

Frequency response: 10 Hz - 30,000 Hz

Bass boost: - 

Highpass: 15 Hz - 4,000 Hz adjustable

Lowpass: 40 Hz - 4,000 Hz adjustable

Bandpass: 15 Hz - 4,000 Hz adjustable

Subsonic: - 

Phase: - 

Slope high- / lowpass: 12 dB/Oct.

Slope subsonic / lowpass: - 

Signal-to-noise ratio digital input: - 

Signal-to-noise ratio analog input: 98 dB (A-weighted)

Distortion (THD): 0.05 %

Damping factor: 100

Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current: 1,100 mA

Fuse: 2 x 30 A Maxi-fuse (APX)

Additional features: Active, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP)

Dimensions (H x W x D): 50 x 230 x 154 mm / 2.00 x 9.06 x 6.06”

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)

Features

• Small footprint Class D amplifier with high output power of 100 Watts RMS @ 4 and 2 Ohms load
• Start-Stop capability down to 6V supply voltage
• Smart highlevel input with ADEP circuit (Advanced Diagnostics Error Protection) and Auto Turn-On function
• Integrated, active crossover with highpass, lowpass and bandpass
• “Input mode” switch for flexible input signal routing
• SMD (Surface Mounted Device) manufacturing technology combines minimum space requirement with maximum reliability
• Exclusive, extremely compact and clean design with illuminated HELIX-logo and low heat dissipation thanks to extraordinary efficiency

Technical data

Output power RMS / max.:
- @ 4 Ohms4 x 100 / 200 Watts
- @ 2 Ohms4 x 100 / 200 Watts
- @ 1 Ohm-
- bridged @ 4 Ohms2 x 200 / 400 Watts
- bridged @ 2 Ohms- 

Max. output power per channel*: Up to 135 Watts RMS @ 4 / 2 Ohms

Amplifier technology: Class D

Inputs:
4 x RCA / Cinch
4 x Highlevel speaker input
1 x Remote In

Input sensitivity:
RCA / Cinch 0.5 - 6 Volts
Highlevel 1.3 - 13 Volts

Input impedance RCA / Cinch: 20 kOhms

Input impedance highlevel: 9 - 33 Ohms

Outputs: 4 x Speaker output

Output voltage RCA / Cinch: - 

Signal converter for digital input: - 

Frequency response: 10 Hz - 30,000 Hz

Bass boost: - 

Highpass: 15 Hz - 4,000 Hz adjustable

Lowpass: 40 Hz - 4,000 Hz adjustable

Bandpass: 15 Hz - 4,000 Hz adjustable

Subsonic: - 

Phase: - 

Slope high- / lowpass: 12 dB/Oct.

Slope subsonic / lowpass: - 

Signal-to-noise ratio digital input: - 

Signal-to-noise ratio analog input: 98 dB (A-weighted)

Distortion (THD): 0.05 %

Damping factor: 100

Operating voltage: 10.5 - 16 Volts (max. 5 sec. down to 6 Volts)

Idle current: 1,100 mA

Fuse: 2 x 30 A Maxi-fuse (APX)

Additional features: Active, adjustable crossover, input mode switch, Start-Stop capability, highlevel input with automatic turn on function and Advanced Diagnostics Error Protection (ADEP)

Dimensions (H x W x D): 50 x 230 x 154 mm / 2.00 x 9.06 x 6.06”

* In typical multi-channel applications (2- / 3-way system + rear + subwoofer)