Focal K2 Power ES 165K

•  Inverted dome “M”-shaped tweeter
• Tweeter easy to install (supplied with accessories)
• 1-1/4 (32mm) VC diameter for higher performance
• Specifications:
• Diameter: 6-1/2″ (165mm)
• Voice coil diameter:1-1/4″ (32mm)
• Voice coil height: 0-9/16″(15mm)
• Motor: Magnet
• Tweeter: TKM (“M” profile aramid fiber inverted dome)
• Cone: Composite K2 Power “W” sandwich cone
• Surround: Tuned Mass Damper (TMD)
• Separated crossover: 6-12/12dB (3.5kHz)
• Tweeter adjustable level: +3; 0; -3dB/oct
• Max Power: 200W Nominal power: 100W RMS
• Sensitivity (2.83V/1m): 90.8dB
• Frequency response: 60Hz-22kHz
• Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

• 4 x 25/38Watts RMS @ 4/2 Ohms
• Input : 4 x High Level, 2 x AUX/RCA
• Output : 4 x High Level,6x RCA (configurable via DSP)
• Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
• Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
• Over 50 kinds of plug+play cables which cover around 300 different car models
• 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
• Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
• For cars without ACC wire, speaker wire can be used to control the start and stop of machine

MB Quart FW1-69A 6"×9" Active Subwoofer

• Peak Power Handling : 150W
• Impedance : 4 Ohm
• High Level Input Sensitivity : 0.9V
• Low Level Input Sensitivity : 0.2V-0.6V
• Frequency Response : 20Hz - 150kHz
• Singal to Noise Ratio : 90dB
• THS&Noise : <0.02%
• Low pass Filter : 40Hz-200Hz
• High pass Filter : 20Hz
• Bass EQ : 0-12dB
• Fuse Size : 25A x 1
• Dimension (W x H x L) : 20.5 x 28 x 7 CM

Focal K2 Power ES 165K

•  Inverted dome “M”-shaped tweeter
• Tweeter easy to install (supplied with accessories)
• 1-1/4 (32mm) VC diameter for higher performance
• Specifications:
• Diameter: 6-1/2″ (165mm)
• Voice coil diameter:1-1/4″ (32mm)
• Voice coil height: 0-9/16″(15mm)
• Motor: Magnet
• Tweeter: TKM (“M” profile aramid fiber inverted dome)
• Cone: Composite K2 Power “W” sandwich cone
• Surround: Tuned Mass Damper (TMD)
• Separated crossover: 6-12/12dB (3.5kHz)
• Tweeter adjustable level: +3; 0; -3dB/oct
• Max Power: 200W Nominal power: 100W RMS
• Sensitivity (2.83V/1m): 90.8dB
• Frequency response: 60Hz-22kHz
• Impedance: 4 Ω

Musway D1S - 4 Channel Class-AB Amp with 6 Channel DSP

• 4 x 25/38Watts RMS @ 4/2 Ohms
• Input : 4 x High Level, 2 x AUX/RCA
• Output : 4 x High Level,6x RCA (configurable via DSP)
• Intelligent Hi-Level Input : EPS (Error Protection System) technology which prevents when connected to an OEM factory radio that no functions are impaired or error messages are written into the vehicle memory
• Start-Stop Ready : Advanced power amplifier control circuit can eliminate the sound interruption at start and stop
• Over 50 kinds of plug+play cables which cover around 300 different car models
• 28-bit DSP main chip supports 10-band EQ, digital crossover and time correction
• Built-in 4-CH high-performance high-to-low converter, Hi-Fi sound quality, low noise
• For cars without ACC wire, speaker wire can be used to control the start and stop of machine

MB Quart FW1-69A 6"×9" Active Subwoofer

• Peak Power Handling : 150W
• Impedance : 4 Ohm
• High Level Input Sensitivity : 0.9V
• Low Level Input Sensitivity : 0.2V-0.6V
• Frequency Response : 20Hz - 150kHz
• Singal to Noise Ratio : 90dB
• THS&Noise : <0.02%
• Low pass Filter : 40Hz-200Hz
• High pass Filter : 20Hz
• Bass EQ : 0-12dB
• Fuse Size : 25A x 1
• Dimension (W x H x L) : 20.5 x 28 x 7 CM