The CO-35.4 offers RCA and AUX-Inputs, which are connected through cinch cables with the preamplifier-outputs of the head unit (head unit, MP3-Player, iPhone, iPad). If the head unit (OEM-RADIO) has no RCA-Output, than it is possible to connect the speaker output to direct RCA-Input and switch has to be turned to "HI". If signal is presented at RCA, AUX or High Input, the amplifier automatically turns on and the power LED lights. With the aid of the gain-controller and variable crossover you are able to adjust the amplifier on to your prefered taste of hearing, the circumstances of the vehicle and to the speakers.


Features

4-channel IC amplifier with AUX IN and RCA input from 0.1 to 13 volts input sensitivity 

Switchable LP filter 80 Hz or 1500Hz, continuously variable HP filter 80-4000 Hz, subsonic level input with automatic switch 

4x 35 watts RMS into 4 ohms or 

4x 50 watts RMS at 2 ohms 

132x45x80 mm

Stable into 2 Ohm Stereo per channel

Extreme high input sensitivity from 0,1 to 13 V

Multi-Way Protection Circuitry: overheat, over load and short circuitry protection

Full-Active-Mode possible

High-Level-Input (normally originial radio) with automatically "Turn-On"

AUX-Input or RCA-Input

Specifications

Power Supply Voltage : 10 - 16 V

Rated Power Output at 14,4 V
- RMS power @ 4 ohm stereo : 4x 35 W
- RMS power @ 2 ohm stereo : 4x 50 W

Signal to Noise Ratio : > 88 dB

Low Pass Filter (LPF) Channel 1+2 : 80 oder 1500 Hz

High Pass Filter (HPF) Channel 3+4 : 80 bis 4000 Hz

Frequency Response : 35 Hz ~ 20 KHz (+/-1 dB)

THD@RMS Watts at 4 Ohm and 1/2 rat...

The CO-35.4 offers RCA and AUX-Inputs, which are connected through cinch cables with the preamplifier-outputs of the head unit (head unit, MP3-Player, iPhone, iPad). If the head unit (OEM-RADIO) has no RCA-Output, than it is possible to connect the speaker output to direct RCA-Input and switch has to be turned to "HI". If signal is presented at RCA, AUX or High Input, the amplifier automatically turns on and the power LED lights. With the aid of the gain-controller and variable crossover you are able to adjust the amplifier on to your prefered taste of hearing, the circumstances of the vehicle and to the speakers.


Features

4-channel IC amplifier with AUX IN and RCA input from 0.1 to 13 volts input sensitivity 

Switchable LP filter 80 Hz or 1500Hz, continuously variable HP filter 80-4000 Hz, subsonic level input with automatic switch 

4x 35 watts RMS into 4 ohms or 

4x 50 watts RMS at 2 ohms 

132x45x80 mm

Stable into 2 Ohm Stereo per channel

Extreme high input sensitivity from 0,1 to 13 V

Multi-Way Protection Circuitry: overheat, over load and short circuitry protection

Full-Active-Mode possible

High-Level-Input (normally originial radio) with automatically "Turn-On"

AUX-Input or RCA-Input

Specifications

Power Supply Voltage : 10 - 16 V

Rated Power Output at 14,4 V
- RMS power @ 4 ohm stereo : 4x 35 W
- RMS power @ 2 ohm stereo : 4x 50 W

Signal to Noise Ratio : > 88 dB

Low Pass Filter (LPF) Channel 1+2 : 80 oder 1500 Hz

High Pass Filter (HPF) Channel 3+4 : 80 bis 4000 Hz

Frequency Response : 35 Hz ~ 20 KHz (+/-1 dB)

THD@RMS Watts at 4 Ohm and 1/2 rat...