Four channel full range PWM amplifier with separate synchronized modulation. Up to 480 Wrms total power, bridgeable and 2-Ohm stable. Thus, the Mosconi PICO 4 masters any constellation: whether classic front-sub / front-rear concepts, doorboard, two subwoofers or subwoofers with dual voice coil. Ideal supplement to a Mosconi PICO DSP amplifier, but with the high-level and low-level input and its own filters, it can also be used universally.

• Active crossover
• Molex connectors
• Compact design
• High current efficiency
• Crossover for semi active operation (Pico 4 SA)
• Available as 24 Volt version (Pico 4 only)

OUTPUT POWER:

• Output power RMS @ 4Ω: 4 x 90 Watts
• Output power RMS @ 2Ω: 4 x 120 Watts
• Output power RMS @ 4Ω: 2 x 85 Watts + 1 x 245 Watts (bridged)
• Output power RMS @ 4Ω: 2 x 240 Watts (bridged)

SPECIFICATIONS:

• Input voltage: 0.3 - 20 V
• Overall efficiency: > 75 %
• Auto-On (only High Level): Off - BTL
• Channel 1+2 Filter (HP): Off – 80 Hz (12 dB/Oct)
• Channel 3+4 Filter (HP/LP): Off – 80 Hz (12 dB/Oct)
• Channel 1+2 Filter (HP): Off – 280 Hz (12 dB/Oct) - Pico 4 SA
• Channel 3+4 Filter (HP/LP): Off - 220 Hz (12 dB/Oct) - Pico 4 SA
• Dimensions: 150 x 115 x 46 mm
• Weight: 1050 Gramm

Four channel full range PWM amplifier with separate synchronized modulation. Up to 480 Wrms total power, bridgeable and 2-Ohm stable. Thus, the Mosconi PICO 4 masters any constellation: whether classic front-sub / front-rear concepts, doorboard, two subwoofers or subwoofers with dual voice coil. Ideal supplement to a Mosconi PICO DSP amplifier, but with the high-level and low-level input and its own filters, it can also be used universally.

• Active crossover
• Molex connectors
• Compact design
• High current efficiency
• Crossover for semi active operation (Pico 4 SA)
• Available as 24 Volt version (Pico 4 only)

OUTPUT POWER:

• Output power RMS @ 4Ω: 4 x 90 Watts
• Output power RMS @ 2Ω: 4 x 120 Watts
• Output power RMS @ 4Ω: 2 x 85 Watts + 1 x 245 Watts (bridged)
• Output power RMS @ 4Ω: 2 x 240 Watts (bridged)

SPECIFICATIONS:

• Input voltage: 0.3 - 20 V
• Overall efficiency: > 75 %
• Auto-On (only High Level): Off - BTL
• Channel 1+2 Filter (HP): Off – 80 Hz (12 dB/Oct)
• Channel 3+4 Filter (HP/LP): Off – 80 Hz (12 dB/Oct)
• Channel 1+2 Filter (HP): Off – 280 Hz (12 dB/Oct) - Pico 4 SA
• Channel 3+4 Filter (HP/LP): Off - 220 Hz (12 dB/Oct) - Pico 4 SA
• Dimensions: 150 x 115 x 46 mm
• Weight: 1050 Gramm