Specifications

• Stereo Amplifier 4 - 8 Ohm stable
• Voltage input 9V - 16V DC
• Minimum output at 4 Ohm loads @ 14.4 Volts
  -2 x 100 w RMS @  -  0.01% THD
  -2 x 240 W RMS @. -  0.1% THD
• ​Minimum output at 8 Ohm loads @ 14.4 Volts
  -2 x 100 W RMS @  -  0.01% THD
  -2 x 160 W RMS @  -  0.1% THD
• Bridge: 1 x 550 W RMS @ 6 - 8Ohm load only  -  0.1% THD
• ​Signal to noise ratio A/W  -  Full Power  -  >-100dB
• ​Frequency response 12Hz-100KHz (-1dB)
• ​Input impedance  -  33K Ohms
• ​Input sensitivity  -  0.3V - 8V
• ​Idle current  -  + -3.0 Amps
• ​Thermal cut out  -  80 Deg C
• ​Internal fuse rating  -  2 x 30 Amps
• DC protection cut off  -  > 9.00 Hz​

Dimensions
-(H) 64mm x (W) 378mm x (D) 339mm
-DST MODEL: (H) 64mm x (W) 730mm x (D) 339mm

Weight
-With Aluminium Lid 7.85kg / With Stainless Lid 8.24kg
-DST MODEL: 16.5kg

Specifications

• Stereo Amplifier 4 - 8 Ohm stable
• Voltage input 9V - 16V DC
• Minimum output at 4 Ohm loads @ 14.4 Volts
  -2 x 100 w RMS @  -  0.01% THD
  -2 x 240 W RMS @. -  0.1% THD
• ​Minimum output at 8 Ohm loads @ 14.4 Volts
  -2 x 100 W RMS @  -  0.01% THD
  -2 x 160 W RMS @  -  0.1% THD
• Bridge: 1 x 550 W RMS @ 6 - 8Ohm load only  -  0.1% THD
• ​Signal to noise ratio A/W  -  Full Power  -  >-100dB
• ​Frequency response 12Hz-100KHz (-1dB)
• ​Input impedance  -  33K Ohms
• ​Input sensitivity  -  0.3V - 8V
• ​Idle current  -  + -3.0 Amps
• ​Thermal cut out  -  80 Deg C
• ​Internal fuse rating  -  2 x 30 Amps
• DC protection cut off  -  > 9.00 Hz​

Dimensions
-(H) 64mm x (W) 378mm x (D) 339mm
-DST MODEL: (H) 64mm x (W) 730mm x (D) 339mm

Weight
-With Aluminium Lid 7.85kg / With Stainless Lid 8.24kg
-DST MODEL: 16.5kg