Not all drivers are created equal, and the visually inspiring Elate Carbon woofers were developed with next-level performance in mind. These new drivers get their Carbon moniker from their triple-layer cones from which they are derived, consisting of two layers of carbon fiber sandwiching a Rohacell foam core. These proprietary cones were developed to give them incredible stiffness, high damping and light weight—the trifecta for cone performance.
Paired with a large 3-inch diameter Hexatech aluminum voice coil, titanium former, and Morel’s EVC motor technology, the Elate Carbon achieves remarkable control and low distortion which translates to highly transparent and bass-rich sound reproduction.
ELATE CARBON MW6 $1888
Specifications
- Nominal Impendance (ohm): 4
- Power Handling Wrms: 180
- Max. Trans. Pwr Handling Wrms (10ms): 1000
- Sensitivity (2.83 V/1M) dB: 87
- Frequency Response Hz: 30 - 4000
- Resonant Freq. Fs Hz: 45
- Voice Coil Diameter mm (inch): 75 (3)
- Voice Coil Height mm (inch): 14.50 (0.57)
- Voice Coil Type/Former: Titanium
- Voice Coil Wire: HexatechTM aluminium
- DC Resistance ohm: 3.6
- Voice Coil Induct. @1 kHz (mH): 0.615
- Magnet System: Double magnet rear vented
- HE-Magnetic Gap Height mm (inch): 5 (0.20)
- B-Flux Density (T): 0.75
- BL Product/BXL: 6.51
- Max. Linear Ex./Xmax mm (inch): ±4.75mm (0.18)
- Suspension Compliance CMS - mm/N: 0.67
- Electrical Q Factor QES: 0.47
- QTS: 0.43
- QMS: 7.19
- Mech. Resistance RMS- N . S / M: 1
- Moving Mass MMS - gr/ounce: 18 (0.63)
- Equiv. Can Air Load VAS - L (cu.ft3): 13.3 (0.47)
- Effective Piston Area SD sq.cm (sq.inch): 120 (18.6)
- Cone Type: One-piece formed
- Cone Material: DPC
- Unit Diameter mm (inch): 165 (6.50)
- Mounting Dept mm (inch): 61 (2.40)
- Mounting Cutout mm (inch): 141 (5.55)
- Net Weight Kg (lb): 1.18 (2.60)
ELATE CARBON MW9 $2188
Specifications
- Nominal Impendance (ohm): 4
- Power Handling Wrms: 200
- Max. Trans. Pwr Handling Wrms (10ms): 1000
- Sensitivity (2.83 V/1M) dB: 89
- Frequency Response Hz: 25 - 3000
- Resonant Freq. Fs Hz: 44
- Voice Coil Diameter mm (inch): 75 (3)
- Voice Coil Height mm (inch): 14.50 (0.57)
- Voice Coil Type/Former: Titanium
- Voice Coil Wire: HexatechTM aluminium
- DC Resistance ohm: 3.6
- Voice Coil Induct. @1 kHz (mH): 0.615
- Magnet System: Double magnet rear vented
- HE-Magnetic Gap Height mm (inch): 5 (0.20)
- B-Flux Density (T): 0.75
- BL Product/BXL: 5.15
- Max. Linear Ex./Xmax mm (inch): ±4.75mm (0.18)
- Suspension Compliance CMS - mm/N: 0.36
- Electrical Q Factor QES: 0.61
- QTS: 0.56
- QMS: 6
- Mech. Resistance RMS- N . S / M: 1.2
- Moving Mass MMS - gr/ounce: 30 (1.05)
- Equiv. Can Air Load VAS - L (cu.ft3): 30.9 (1.1)
- Effective Piston Area SD sq.cm (sq.inch): 219 (33.95)
- Cone Type: One-piece formed
- Cone Material: DPC
- Unit Diameter mm (inch): 222 (8.75)
- Mounting Dept mm (inch): 71 (2.80)
- Mounting Cutout mm (inch): 192 (7.56)
- Net Weight Kg (lb): 1.42 (3.13)
You may also like:
