Passione Audio Oro-D12MKII DSP is a multi-function digital processor featuring analog input, capable of transforming ordinary OEM or after-market system into a high-performance system.
Provided with a 32 bit, 147 MHz clock speed DSP as well as 24 bit A/D and D/A converters, Passione Oro OO-D12MKII is controlled by a software especially developed for signal treatment according to the vehicle acoustic peculiarities. Setting the parameters of each input single channel, setting the delays according to the listening position, adjusting crossovers and equalizers for each of the 12 output channels; all of these operations can be managed by the PC.During the installation phase, after converting the analog signal into digital, Oro OO-D12MKII automatically reconstructs a digital full-bandwidth stereo signal; de-equalizes the frequency response and, if necessary, reconstructs the central and subwoofer channels. The user can configure the output mode of each channel relative to the installed system.
It is built with a USB port for flash drive for high quality audio source and a IR port for connection of a Infra Red receiver for song selection via a remote control .
Advance Bluetooth technology to allow additional source from phone or other media player streaming through Oro OO-D12MKII and experience near loss less quality. Wi-Fi connectivity between the DSP and smart phone for Apps to have direct control over the perimeters of sound. User can also connect Oro OO-D12MKII via USB cable to PC for professional tuning with a wide spectrum of platforms for sounf adjustments.
Analog Inputs 10 ch high lev. + 2 pre in
Digital Inputs SPDIF (12-96 KHZ)
Remote Control Input (Only Applicable with Remote Commander RC-10)
Analog Outputs 12
Digital Outputs Not available
Equalizers for each Outputs 31-band graphic equalizer (1/3 Oct.; ±12dB)
Crossover Filter Type Full / Hi-Pass / Low Pass / Band Pass
Filter mode and slope Linkwitz @ 12 / 24Butterworth @ 6 / 12 / 18 / 24Bessel @ dB / oct -48dB / oct (step @ 6dB / oct
Bluetooth Music streaming from smart phone or media player
Power RMS≤ 1% THD + N
– @ 4 ohms 75 watts per channel
– @ 2 ohms 120 watts per channel
– Maximum output power per channel, up to 160 watts RMS@ 2 ohms
(Note: configuration required.)