BG Dot 4 Brake Fluid provides the ultimate high-temperature protection, moisture resistance, and lubricity for all disc and drum brake systems in which DOT 4 fluid is recommended. It meets or exceeds Federal Motor Vehicle Safety Standard (FMVSS) No. 116 (DOT 4) and surpasses Society of Automotive Engineers (SAE) J1704 specifications. Provides the ultimate in high temperature protection, moisture resistance, and lubricity. 

Suitable for use in conventional and anti-lock (ABS) brake systems that require DOT 4 brake fluid. Use BG DOT 4 Brake Fluid to completely flush out all old fluid.

Keep the container clean and tightly closed to prevent absorption of moisture.

• DryEquilibrium Reflux Boiling Point, min 260°C (500°F)
• Wet Equilibrium Reflux Boiling Point, min. 166°C (330°F)

Usage:

1. Clean all dirt around the cover on the master cylinder before removing. 
2. Fill the unit to the level specified by the manufacturer. 
3. Replace cover. 
4. Check fluid level once a month. To bleed the system, refer to the service manual. 
5. Do not reuse brake fluid from a bleeding operation. 

Caution:

Never wash cylinders or parts with gasoline, kerosene, or oil. Avoid spilling fluid on the car's finish or brake lining.

For Professional Use:

BG Products, Inc., accepts no liability for excessive use or misuse of this product.

BG Dot 4 Brake Fluid provides the ultimate high-temperature protection, moisture resistance, and lubricity for all disc and drum brake systems in which DOT 4 fluid is recommended. It meets or exceeds Federal Motor Vehicle Safety Standard (FMVSS) No. 116 (DOT 4) and surpasses Society of Automotive Engineers (SAE) J1704 specifications. Provides the ultimate in high temperature protection, moisture resistance, and lubricity. 

Suitable for use in conventional and anti-lock (ABS) brake systems that require DOT 4 brake fluid. Use BG DOT 4 Brake Fluid to completely flush out all old fluid.

Keep the container clean and tightly closed to prevent absorption of moisture.

• DryEquilibrium Reflux Boiling Point, min 260°C (500°F)
• Wet Equilibrium Reflux Boiling Point, min. 166°C (330°F)

Usage:

1. Clean all dirt around the cover on the master cylinder before removing. 
2. Fill the unit to the level specified by the manufacturer. 
3. Replace cover. 
4. Check fluid level once a month. To bleed the system, refer to the service manual. 
5. Do not reuse brake fluid from a bleeding operation. 

Caution:

Never wash cylinders or parts with gasoline, kerosene, or oil. Avoid spilling fluid on the car's finish or brake lining.

For Professional Use:

BG Products, Inc., accepts no liability for excessive use or misuse of this product.