Adopting professional and superior materials can effectively remove greasy dirt, gum, and carbon deposits on the PVC valve, ERG valve, choke, and other parts. It can easily flush off the charcoal residue on the carburetor with its spray tube. The product can enhance combustion efficiency, help you save oil, and decrease gas pollution.

Features:

• One Easy Step of Spraying
• Cleans carburetors, linkages, and chokes
• Removes gum and varnish inside and outside
• Enhances combustion efficiency, helps to save oil, and decreases gas pollution

Package Contents:

• 1 x Carburetor Cleaner 450ML

Usage Direction:

1. Remove the air filter and spray the exterior carburetor linkage. 
2. Spray short bursts into the carburetor bowl while the engine is idling.

Automatic Choke: 

1. Open and close by hand while spraying on the choke valve shaft. 
2. If the choke continues to stick, remove the choke cover. 
3. Start the engine and spray the vacuum cylinder while idling.

PCV Valve: 

1. Disconnect the crankcase side of the valve and spray short bursts into the exposed end. THIS MUST BE DONE WHEN THE ENGINE IS COLD. 
2. Allow to penetrate. Start the engine and once again spray into the exposed end of the valve. 
3. Wait a minute and turn the engine off.

Manifold Heat Controls: 

1. Spray on the exposed ends of the heater valve when the engine is cold. 
2. Allow to penetrate. Move the counterweight back and forth until the valve frees up.

Caution‼️
▫️ Place it in a cool place and dry condition
▫️ Avoid direct sunlight
▫️ Keep away from children and animals.

Adopting professional and superior materials can effectively remove greasy dirt, gum, and carbon deposits on the PVC valve, ERG valve, choke, and other parts. It can easily flush off the charcoal residue on the carburetor with its spray tube. The product can enhance combustion efficiency, help you save oil, and decrease gas pollution.

Features:

• One Easy Step of Spraying
• Cleans carburetors, linkages, and chokes
• Removes gum and varnish inside and outside
• Enhances combustion efficiency, helps to save oil, and decreases gas pollution

Package Contents:

• 1 x Carburetor Cleaner 450ML

Usage Direction:

1. Remove the air filter and spray the exterior carburetor linkage. 
2. Spray short bursts into the carburetor bowl while the engine is idling.

Automatic Choke: 

1. Open and close by hand while spraying on the choke valve shaft. 
2. If the choke continues to stick, remove the choke cover. 
3. Start the engine and spray the vacuum cylinder while idling.

PCV Valve: 

1. Disconnect the crankcase side of the valve and spray short bursts into the exposed end. THIS MUST BE DONE WHEN THE ENGINE IS COLD. 
2. Allow to penetrate. Start the engine and once again spray into the exposed end of the valve. 
3. Wait a minute and turn the engine off.

Manifold Heat Controls: 

1. Spray on the exposed ends of the heater valve when the engine is cold. 
2. Allow to penetrate. Move the counterweight back and forth until the valve frees up.

Caution‼️
▫️ Place it in a cool place and dry condition
▫️ Avoid direct sunlight
▫️ Keep away from children and animals.