Graphene Shampoo is a versatile solution combining a foaming degreaser and shampoo that will aid in the removal of stubborn contaminants without harming your existing coating, sealant, or wax! 

This variation on a traditional foaming shampoo balances choice, high-foaming surfactants, and citrus-based degreasers to generate a wash that is more than capable of powering through all kinds of road films and grime with ease!

Features:

• Contains Graphene Ceramic Resins
• Helps Maintain & Revitalize Graphene and Ceramic Coatings
• Highly Concentrated, Low Viscosity, Free Rinsing Formula
• More Easily Removes Road Films & Grime
• pH 8-9
• Smoke Color and Fresh, Clean, Citrus Scent

Graphene Shampoo is also the shampoo recommended to work best to revitalize and maintain the coatings generated by products like Graphene Ceramic Coating or Graphene Ceramic Spray Coating once applied. Graphene Shampoo helps to decontaminate the coatings by removing harmful contaminants that would sap the coating’s durability and interfere with the hydrophobic, self-cleaning effects.

Instructions for Use with Foam Cannon, Foam Gun, or Pump Sprayer:

1. Add a small quantity of water to your foam cannon, foam gun, or pump sprayer and dispense 2-3 fl oz of Graphene Shampoo to the reservoir. 
2. Top up with water to the volume and tilt/agitate the bottle to fully dissolve the shampoo.

Instructions for Two Bucket Wash Method:

1. Start by adding a grit guard to each of the rinse bucket and wash bucket, along with adding any of a wash pad, mitt, or sponge, and 2-3 fl oz of Graphene Shampoo to the wash bucket specifically. Now add approximately 3 gallons of water to fill each bucket.
2. Working from the top of the vehicle down to the bottom, in small sections, wash the vehicle and periodically dunk the wash pad, mitt, or sponge in the rinse bucket before dunking it back into your wash bucket to get fresh suds. This helps keep contaminants that could scratch the paintwork trapped in the rinse bucket rather than infiltrating into the wash bucket. Repeat this process for the entire vehicle.
3. Rinse off the vehicle thoroughly until no evidence of bubbles or foam persists.
4. Dry the vehicle utilizing a combination of a drying aid, pressurized air, and/or drying towels, to avoid any potential water spotting.

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2o-m5bhs2s631q881@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra0q-m5bhs2s64gao0a@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2k-m5bhs2s65uv4a5@resize_w1750_nl 2x" sizes="100vw" width="875">

Common Sense Warning:

Always apply soaps, including Graphene Shampoo, on cool surfaces, trying to avoid allowing the soap to dry on the surface and, when able, not using it in direct sunlight.

Graphene Shampoo is a versatile solution combining a foaming degreaser and shampoo that will aid in the removal of stubborn contaminants without harming your existing coating, sealant, or wax! 

This variation on a traditional foaming shampoo balances choice, high-foaming surfactants, and citrus-based degreasers to generate a wash that is more than capable of powering through all kinds of road films and grime with ease!

Features:

• Contains Graphene Ceramic Resins
• Helps Maintain & Revitalize Graphene and Ceramic Coatings
• Highly Concentrated, Low Viscosity, Free Rinsing Formula
• More Easily Removes Road Films & Grime
• pH 8-9
• Smoke Color and Fresh, Clean, Citrus Scent

Graphene Shampoo is also the shampoo recommended to work best to revitalize and maintain the coatings generated by products like Graphene Ceramic Coating or Graphene Ceramic Spray Coating once applied. Graphene Shampoo helps to decontaminate the coatings by removing harmful contaminants that would sap the coating’s durability and interfere with the hydrophobic, self-cleaning effects.

Instructions for Use with Foam Cannon, Foam Gun, or Pump Sprayer:

1. Add a small quantity of water to your foam cannon, foam gun, or pump sprayer and dispense 2-3 fl oz of Graphene Shampoo to the reservoir. 
2. Top up with water to the volume and tilt/agitate the bottle to fully dissolve the shampoo.

Instructions for Two Bucket Wash Method:

1. Start by adding a grit guard to each of the rinse bucket and wash bucket, along with adding any of a wash pad, mitt, or sponge, and 2-3 fl oz of Graphene Shampoo to the wash bucket specifically. Now add approximately 3 gallons of water to fill each bucket.
2. Working from the top of the vehicle down to the bottom, in small sections, wash the vehicle and periodically dunk the wash pad, mitt, or sponge in the rinse bucket before dunking it back into your wash bucket to get fresh suds. This helps keep contaminants that could scratch the paintwork trapped in the rinse bucket rather than infiltrating into the wash bucket. Repeat this process for the entire vehicle.
3. Rinse off the vehicle thoroughly until no evidence of bubbles or foam persists.
4. Dry the vehicle utilizing a combination of a drying aid, pressurized air, and/or drying towels, to avoid any potential water spotting.

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2o-m5bhs2s631q881@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra0q-m5bhs2s64gao0a@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2k-m5bhs2s65uv4a5@resize_w1750_nl 2x" sizes="100vw" width="875">

Common Sense Warning:

Always apply soaps, including Graphene Shampoo, on cool surfaces, trying to avoid allowing the soap to dry on the surface and, when able, not using it in direct sunlight.