Adam’s Graphene Ceramic Spray Coating Advanced is an easy-to-use Ceramic Coating that can be seen where applied using the Adam’s UV Flashlight and our patent-pending UV Tracer Technology. This coating is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.

Features:

• Less Prone to Water Spotting
• Lower Sliding Angle With Water Evacuating at Angles < 10-15°
• Higher Contact Averaging 110-118°
• Higher Stain Resistance Against Bugs, Saps, Droppings, etc.
• Higher Scratch and Mar Resistance During the Washing Process
• Easier to Apply, Slicker, and Glossier Than Conventional Ceramic Coatings
• 100% Increased Coating Resin Over Graphene Ceramic Spray Coating
• Add 12-18 Months of Ceramic Protection in Minutes

Warning - DO NOT SMELL

Instructions:

1. As with any Ceramic Coating, preparation is key. Use an Adam's Clay Bar/Mitt and an Adam's Swirl Killer to remove contamination, oxidation, swirls/scratches for optimal results.
2. Maximize protection by using Adam's Surface Prep to remove any surface oils or residues.
3. Spray Adam's Graphene Ceramic Spray Coating Advanced into a Microfiber Applicator, or an Adam's Premium Microfiber Towel.
4. Spray and spread the product onto the paint, allowing the surface to be fully covered.
5. Allow the product to sit for 1-2 minutes.
6. Buff to a high shine with an Adam's Premium Microfiber Towel.
7. Allow 4 hours to cure before exposure to elements.

https://down-sg.img.susercontent.com/file/sg-11134208-7ra1s-m540x9r9wou8f8@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2j-m544tv1qw2gb47@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra37-m544tv1qxh0r07@resize_w1750_nl 2x" sizes="100vw" width="875">

Adam’s Graphene Ceramic Spray Coating Advanced is an easy-to-use Ceramic Coating that can be seen where applied using the Adam’s UV Flashlight and our patent-pending UV Tracer Technology. This coating is appropriate to add long-lasting, extreme self-cleaning effects for single-stage and clear-coated, painted surfaces, glass, plastic trim, polycarbonate, rubber moulding, and wheels with a single bottle.

Features:

• Less Prone to Water Spotting
• Lower Sliding Angle With Water Evacuating at Angles < 10-15°
• Higher Contact Averaging 110-118°
• Higher Stain Resistance Against Bugs, Saps, Droppings, etc.
• Higher Scratch and Mar Resistance During the Washing Process
• Easier to Apply, Slicker, and Glossier Than Conventional Ceramic Coatings
• 100% Increased Coating Resin Over Graphene Ceramic Spray Coating
• Add 12-18 Months of Ceramic Protection in Minutes

Warning - DO NOT SMELL

Instructions:

1. As with any Ceramic Coating, preparation is key. Use an Adam's Clay Bar/Mitt and an Adam's Swirl Killer to remove contamination, oxidation, swirls/scratches for optimal results.
2. Maximize protection by using Adam's Surface Prep to remove any surface oils or residues.
3. Spray Adam's Graphene Ceramic Spray Coating Advanced into a Microfiber Applicator, or an Adam's Premium Microfiber Towel.
4. Spray and spread the product onto the paint, allowing the surface to be fully covered.
5. Allow the product to sit for 1-2 minutes.
6. Buff to a high shine with an Adam's Premium Microfiber Towel.
7. Allow 4 hours to cure before exposure to elements.

https://down-sg.img.susercontent.com/file/sg-11134208-7ra1s-m540x9r9wou8f8@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra2j-m544tv1qw2gb47@resize_w1750_nl 2x" sizes="100vw" width="875">

https://down-sg.img.susercontent.com/file/sg-11134208-7ra37-m544tv1qxh0r07@resize_w1750_nl 2x" sizes="100vw" width="875">